This product is ideal for the cost conscience
consumer that wants a good finished result. It takes a
little patience to get the hang of the epoxy, but it's quite
easy if you just take a few extra steps in the preparation.
I ordered the kit and after spending a few hours going over
every detail of the instructions, I was ready to get
started. The extra preparation paid off right away when I
started working with the epoxy. It sets up a little more
quickly than I thought, but because of the extra steps, I
was able to recover and got a very satisfactory result.
The grout bits are an absolute necessity for the guy using a Dremel type tool for grout removal. They are long lasting and at a fraction of the cost of the manufacturer's bits. I ordered extras after going through about 10 of the factory bits at ten bucks a pop and I was not even a third of the way finished. I strongly recommend using the lower speed when using a Dremel tool because you'll have much better control and a better chance of recovery if you slip a little. The faster the motor is going, the faster and more damage it does if you make a mistake.
Here's my pics of my finished product with apologies for not taking "before" pictures. But please believe me, it was big time ugly. I can't recommend the product strongly enough if you want a good result at a fraction of the cost of a tear-out and rebuild.
Culver City, CA